|
Tray•plotter® Shielding Block Image
Plotter
 Huestis
Medical's Tray•plotter® shielding block image plotter
outlines block images directly onto shadow trays. Tray•plotter
enables therapists to quickly and precisely position an alloy
shielding block on the tray to provide highly accurate tissue
targeting and patient protection during radiation therapy.
Tray•plotter is offered as an optional accessory to
Huestis Medical's Compu•cutter® computerized block
cutters. This quick, easy to use plotter utilizes the same
file that cuts the shielding block shape to provide maximum
block alignment accuracy.
Features
Direct Outline Plotting
- Plots block outline directly onto tray.
Accurate, Easy and Fast Set-Up
- Uses the same file that cuts and processes the shielding
block shape to ensure alignment accuracy.
- Direct positioning dramatically reduces errors and set-up
time.
Corrects for Collimator Rotation
- Image is automatically corrected for collimator rotation
for alignment accuracy and orientation.
Prints Block/ Patient Information
- Conveniently prints pertinent block and patient information
directly on a pre-designated area of the tray.
Accepts Wide Variety of Block Trays
- 8” — 14.19” wide, “Y” (20.3 cm
— 36 cm).
- 9.63” — 15” long, “X” (24.5 cm
— 38 cm). (including the handle area).
- .125” — .375” thick, (3.2 mm — 9.5
mm).
- Accepts trays with holes or slots.
Large Print Area
- 10” wide x 12” long (25.4 cm — 30.5 cm).
Selectable Printing Format
- Printing format is selectable between solid and dotted
lines to accommodate holes or slots in block tray.
No Additional Power Requirements
- Included power adapter shares the existing printer's power
receptacle.
- Serial interface cable connects directly to the COM1 port
on your Huestis Medical Compu•cutter.
- Convenient push button “Power-On” switch easily
located on side of unit.
Quick Block Tray Loading
- Support arm and pen carriage automatically seek home position
when unit is powered up.
- Movable support arm slides toward pen holder for block
tray clearance.
- Block tray is placed and securely positioned on spring-loaded
capture pins and tray rail lips.
Software Support
- Included Compu•cutter® software upgrade allows
Tray•plotter to operate with your existing system.
- Compatible with Windows 3.11 or Windows95 drivers.
- Dialog prompts provide simple, clear instructions throughout
plotting.
Electrical
- Voltage: 115 VAC, 50/60 Hz, 1 A.
Size
- Width: 18.25” (46.4 cm).
- Length: 24.25” (61.6 cm).
- Height: 4.25” (10.8 cm).
|
